How to Measure
Measure the rod or track width first, then the drop from the rod to where the hem should end. HouseKOL turns those into a finished width and length per panel using the fullness your fabric and header need.
Four numbers, kept separate
| Window width | The window frame, edge to edge. |
|---|---|
| Rod or track width | The span your curtains must cover. |
| Finished width per panel | What we sew, after fullness, split across panels. |
| Finished length per panel | Rod/track top to your chosen hem point. |
| Number of panels | Usually 2 for a standard window. |
Diagram: [window frame] inside [rod/track span] — finished panels hang from the rod/track, not from the glass. A labeled size diagram will replace this text once licensed artwork is approved.
Start with the hardware
If a rod or track is already installed, its width is the most useful number: it decides how much fabric you need. No hardware yet? Measure the window frame and tell us where you plan to mount — inside the frame, on the wall above it, or ceiling-mounted.
Width: window vs. rod vs. finished panel
Window width is the glass and frame. Rod or track width is the span the curtains must cover. Finished width per panel is what we actually sew, after fullness is applied and the total is split across your panels. They are three different numbers — our measuring tool keeps them separate.
Length
Measure from the top of the rod or track to the floor, a sill, or below the sill — wherever you want the hem to land. Tell us the mount position and floor height and we will confirm the finished length per panel before anything is made.
Not sure? Send a photo
You do not need perfect numbers to start. Send a window photo with your ZIP code and we will walk you through the two or three measurements that matter for your window.